driver_ba234_read_test.c

Go to the documentation of this file.

 
#include "driver_ba234_read_test.h"
 
static ba234_handle_t gs_handle;        

uint8_t ba234_read_test(uint32_t times)
{
    uint8_t res;
    uint32_t i;
    ba234_info_t info;
    
    /* link interface function */
    DRIVER_BA234_LINK_INIT(&gs_handle, ba234_handle_t);
    DRIVER_BA234_LINK_UART_INIT(&gs_handle, ba234_interface_uart_init);
    DRIVER_BA234_LINK_UART_DEINIT(&gs_handle, ba234_interface_uart_deinit);
    DRIVER_BA234_LINK_UART_READ(&gs_handle, ba234_interface_uart_read);
    DRIVER_BA234_LINK_UART_FLUSH(&gs_handle, ba234_interface_uart_flush);
    DRIVER_BA234_LINK_UART_WRITE(&gs_handle, ba234_interface_uart_write);
    DRIVER_BA234_LINK_DELAY_MS(&gs_handle, ba234_interface_delay_ms);
    DRIVER_BA234_LINK_DEBUG_PRINT(&gs_handle, ba234_interface_debug_print);
    
    /* get ba234 information */
    res = ba234_info(&info);
    if (res != 0)
    {
        ba234_interface_debug_print("ba234: get info failed.\n");
       
        return 1;
    }
    else
    {
        /* print chip information */
        ba234_interface_debug_print("ba234: chip is %s.\n", info.chip_name);
        ba234_interface_debug_print("ba234: manufacturer is %s.\n", info.manufacturer_name);
        ba234_interface_debug_print("ba234: interface is %s.\n", info.interface);
        ba234_interface_debug_print("ba234: driver version is %d.%d.\n", info.driver_version / 1000, (info.driver_version % 1000) / 100);
        ba234_interface_debug_print("ba234: min supply voltage is %0.1fV.\n", info.supply_voltage_min_v);
        ba234_interface_debug_print("ba234: max supply voltage is %0.1fV.\n", info.supply_voltage_max_v);
        ba234_interface_debug_print("ba234: max current is %0.2fmA.\n", info.max_current_ma);
        ba234_interface_debug_print("ba234: max temperature is %0.1fC.\n", info.temperature_max);
        ba234_interface_debug_print("ba234: min temperature is %0.1fC.\n", info.temperature_min);
    }
    
    /* start read test */
    ba234_interface_debug_print("ba234: start read test.\n");
    
    /* ba234 init */
    res = ba234_init(&gs_handle);
    if (res != 0)
    {
        ba234_interface_debug_print("ba234: init failed.\n");
 
        return 1;
    }
    
    for (i = 0; i < times; i++)
    {
        ba234_data_t data;
        
        /* delay 1000ms */
        ba234_interface_delay_ms(1000);
        
        /* read */
        res = ba234_read(&gs_handle, &data);
        if (res != 0)
        {
            ba234_interface_debug_print("ba234: read failed.\n");
            (void)ba234_deinit(&gs_handle);
            
            return 1;
        }
        
        /* output */
        ba234_interface_debug_print("ba234: tds is %0.1fppm.\n", data.tds_ppm);
        ba234_interface_debug_print("ba234: electrical conductivity is %0.1fus/cm.\n", data.electrical_conductivity_us_cm);
        ba234_interface_debug_print("ba234: salinity percentage is %0.2f%%.\n", data.salinity_percentage);
        ba234_interface_debug_print("ba234: specific gravity is %0.5f.\n", data.specific_gravity);
        ba234_interface_debug_print("ba234: temperature is %0.1fC.\n", data.temperature_degrees_celsius);
        ba234_interface_debug_print("ba234: water hardness is %0.1fppm.\n", data.water_hardness_ppm);
    }
    
    /* finish read test */
    ba234_interface_debug_print("ba234: finish read test.\n");
    (void)ba234_deinit(&gs_handle);
 
    return 0;
}