driver_bme688_basic.c

Go to the documentation of this file.

 
#include "driver_bme688_basic.h"
 
static bme688_handle_t gs_handle;        

uint8_t bme688_basic_init(bme688_interface_t interface, bme688_address_t addr_pin)
{
    uint8_t res;
    
    /* link interface function */
    DRIVER_BME688_LINK_INIT(&gs_handle, bme688_handle_t); 
    DRIVER_BME688_LINK_IIC_INIT(&gs_handle, bme688_interface_iic_init);
    DRIVER_BME688_LINK_IIC_DEINIT(&gs_handle, bme688_interface_iic_deinit);
    DRIVER_BME688_LINK_IIC_READ(&gs_handle, bme688_interface_iic_read);
    DRIVER_BME688_LINK_IIC_WRITE(&gs_handle, bme688_interface_iic_write);
    DRIVER_BME688_LINK_SPI_INIT(&gs_handle, bme688_interface_spi_init);
    DRIVER_BME688_LINK_SPI_DEINIT(&gs_handle, bme688_interface_spi_deinit);
    DRIVER_BME688_LINK_SPI_READ(&gs_handle, bme688_interface_spi_read);
    DRIVER_BME688_LINK_SPI_WRITE(&gs_handle, bme688_interface_spi_write);
    DRIVER_BME688_LINK_DELAY_MS(&gs_handle, bme688_interface_delay_ms);
    DRIVER_BME688_LINK_DEBUG_PRINT(&gs_handle, bme688_interface_debug_print);
    DRIVER_BME688_LINK_RECEIVE_CALLBACK(&gs_handle, bme688_interface_receive_callback);
    
    /* set interface */
    res = bme688_set_interface(&gs_handle, interface);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set interface failed.\n");
       
        return 1;
    }
    
    /* set addr pin */
    res = bme688_set_addr_pin(&gs_handle, addr_pin);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set addr pin failed.\n");
       
        return 1;
    }
    
    /* bme688 init */
    res = bme688_init(&gs_handle);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: init failed.\n");
        
        return 1;
    }
    
    /* set default temperature oversampling */
    res = bme688_set_temperature_oversampling(&gs_handle, BME688_BASIC_DEFAULT_TEMPERATURE_OVERSAMPLING);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set temperature oversampling failed.\n");
        (void)bme688_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set default pressure oversampling */
    res = bme688_set_pressure_oversampling(&gs_handle, BME688_BASIC_DEFAULT_PRESSURE_OVERSAMPLING);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set pressure oversampling failed.\n");
        (void)bme688_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set default humidity oversampling */
    res = bme688_set_humidity_oversampling(&gs_handle, BME688_BASIC_DEFAULT_HUMIDITY_OVERSAMPLING);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set humidity oversampling failed.\n");
        (void)bme688_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set default filter */
    res = bme688_set_filter(&gs_handle, BME688_BASIC_DEFAULT_FILTER);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set filter failed.\n");
        (void)bme688_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set default spi wire */
    res = bme688_set_spi_wire(&gs_handle, BME688_BASIC_DEFAULT_SPI_WIRE);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set spi wire failed.\n");
        (void)bme688_deinit(&gs_handle);
        
        return 1;
    }
    
    /* enable heater off */
    res = bme688_set_heater_off(&gs_handle, BME688_BOOL_TRUE);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set heat off failed.\n");
        (void)bme688_deinit(&gs_handle); 
        
        return 1;
    }
    
    /* disable run gas */
    res = bme688_set_run_gas(&gs_handle, BME688_BOOL_FALSE);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set run gas failed.\n");
        (void)bme688_deinit(&gs_handle); 
        
        return 1;
    }
    
    /* set sleep mode */
    res = bme688_set_mode(&gs_handle, BME688_MODE_SLEEP);
    if (res != 0)
    {
        bme688_interface_debug_print("bme688: set mode failed.\n");
        (void)bme688_deinit(&gs_handle); 
        
        return 1;
    }
    
    return 0;
}

uint8_t bme688_basic_read(float *temperature, float *pressure, float *humidity_percentage)
{
    uint32_t temperature_yaw;
    uint32_t pressure_yaw;
    uint32_t humidity_raw;
    
    /* read temperature pressure and humidity */
    if (bme688_read_temperature_pressure_humidity(&gs_handle, BME688_SECTION_0, (uint32_t *)&temperature_yaw, 
                                                  temperature, (uint32_t *)&pressure_yaw, pressure,
                                                 (uint32_t *)&humidity_raw, humidity_percentage) != 0)
    {
        return 1;
    }
    
    return 0;
}

uint8_t bme688_basic_deinit(void)
{
    /* enable heater off */
    if (bme688_set_heater_off(&gs_handle, BME688_BOOL_TRUE) != 0)
    {
        return 1;
    }
    
    /* close bme688 */
    if (bme688_deinit(&gs_handle) != 0)
    {
        return 1;
    }
    
    return 0;
}