driver_sx1262_lora.h

Go to the documentation of this file.

 
#ifndef DRIVER_SX1262_LORA_H
#define DRIVER_SX1262_LORA_H
 
#include "driver_sx1262_interface.h"
 
#ifdef __cplusplus
extern "C"{
#endif


#define SX1262_LORA_DEFAULT_STOP_TIMER_ON_PREAMBLE      SX1262_BOOL_FALSE                 
#define SX1262_LORA_DEFAULT_REGULATOR_MODE              SX1262_REGULATOR_MODE_DC_DC_LDO   
#define SX1262_LORA_DEFAULT_PA_CONFIG_DUTY_CYCLE        0x02                              
#define SX1262_LORA_DEFAULT_PA_CONFIG_HP_MAX            0x03                              
#define SX1262_LORA_DEFAULT_TX_DBM                      17                                
#define SX1262_LORA_DEFAULT_RAMP_TIME                   SX1262_RAMP_TIME_10US             
#define SX1262_LORA_DEFAULT_SF                          SX1262_LORA_SF_9                  
#define SX1262_LORA_DEFAULT_BANDWIDTH                   SX1262_LORA_BANDWIDTH_125_KHZ     
#define SX1262_LORA_DEFAULT_CR                          SX1262_LORA_CR_4_5                
#define SX1262_LORA_DEFAULT_LOW_DATA_RATE_OPTIMIZE      SX1262_BOOL_FALSE                 
#define SX1262_LORA_DEFAULT_RF_FREQUENCY                480000000U                        
#define SX1262_LORA_DEFAULT_SYMB_NUM_TIMEOUT            0                                 
#define SX1262_LORA_DEFAULT_SYNC_WORD                   0x3444U                           
#define SX1262_LORA_DEFAULT_RX_GAIN                     0x94                              
#define SX1262_LORA_DEFAULT_OCP                         0x38                              
#define SX1262_LORA_DEFAULT_PREAMBLE_LENGTH             12                                
#define SX1262_LORA_DEFAULT_HEADER                      SX1262_LORA_HEADER_EXPLICIT       
#define SX1262_LORA_DEFAULT_BUFFER_SIZE                 255                               
#define SX1262_LORA_DEFAULT_CRC_TYPE                    SX1262_LORA_CRC_TYPE_ON           
#define SX1262_LORA_DEFAULT_INVERT_IQ                   SX1262_BOOL_FALSE                 
#define SX1262_LORA_DEFAULT_CAD_SYMBOL_NUM              SX1262_LORA_CAD_SYMBOL_NUM_2      
#define SX1262_LORA_DEFAULT_CAD_DET_PEAK                24                                
#define SX1262_LORA_DEFAULT_CAD_DET_MIN                 10                                
#define SX1262_LORA_DEFAULT_START_MODE                  SX1262_START_MODE_WARM            
#define SX1262_LORA_DEFAULT_RTC_WAKE_UP                 SX1262_BOOL_TRUE                  

uint8_t sx1262_lora_irq_handler(void);

uint8_t sx1262_lora_init(void (*callback)(uint16_t type, uint8_t *buf, uint16_t len));

uint8_t sx1262_lora_deinit(void);

uint8_t sx1262_lora_set_continuous_receive_mode(void);

uint8_t sx1262_lora_set_shot_receive_mode(double us);

uint8_t sx1262_lora_set_send_mode(void);

uint8_t sx1262_lora_send(uint8_t *buf, uint16_t len);

uint8_t sx1262_lora_run_cad(sx1262_bool_t *enable);

uint8_t sx1262_lora_get_status(float *rssi, float *snr);

uint8_t sx1262_lora_check_packet_error(sx1262_bool_t *enable);

uint8_t sx1262_lora_sleep(void);

uint8_t sx1262_lora_wake_up(void);

 
#ifdef __cplusplus
}
#endif
 
#endif