driver_uvis25_read_test.c

Go to the documentation of this file.

 
#include "driver_uvis25_read_test.h"
 
static uvis25_handle_t gs_handle;        

uint8_t uvis25_read_test(uvis25_interface_t interface, uint32_t times)
{
    uint8_t res, reg;
    uint32_t i;
    uvis25_info_t info;
    
    /* link functions */
    DRIVER_UVIS25_LINK_INIT(&gs_handle, uvis25_handle_t);
    DRIVER_UVIS25_LINK_IIC_INIT(&gs_handle, uvis25_interface_iic_init);
    DRIVER_UVIS25_LINK_IIC_DEINIT(&gs_handle, uvis25_interface_iic_deinit);
    DRIVER_UVIS25_LINK_IIC_READ(&gs_handle, uvis25_interface_iic_read);
    DRIVER_UVIS25_LINK_IIC_WRITE(&gs_handle, uvis25_interface_iic_write);
    DRIVER_UVIS25_LINK_SPI_INIT(&gs_handle, uvis25_interface_spi_init);
    DRIVER_UVIS25_LINK_SPI_DEINIT(&gs_handle, uvis25_interface_spi_deinit);
    DRIVER_UVIS25_LINK_SPI_READ(&gs_handle, uvis25_interface_spi_read);
    DRIVER_UVIS25_LINK_SPI_WRITE(&gs_handle, uvis25_interface_spi_write);
    DRIVER_UVIS25_LINK_DELAY_MS(&gs_handle, uvis25_interface_delay_ms);
    DRIVER_UVIS25_LINK_DEBUG_PRINT(&gs_handle, uvis25_interface_debug_print);
    DRIVER_UVIS25_LINK_RECEIVE_CALLBACK(&gs_handle, uvis25_interface_receive_callback); 
 
    /* get information */
    res = uvis25_info(&info);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: get info failed.\n");
       
        return 1;
    }
    else
    {
        /* print chip information */
        uvis25_interface_debug_print("uvis25: chip is %s.\n", info.chip_name);
        uvis25_interface_debug_print("uvis25: manufacturer is %s.\n", info.manufacturer_name);
        uvis25_interface_debug_print("uvis25: interface is %s.\n", info.interface);
        uvis25_interface_debug_print("uvis25: driver version is %d.%d.\n", info.driver_version / 1000, (info.driver_version % 1000) / 100);
        uvis25_interface_debug_print("uvis25: min supply voltage is %0.1fV.\n", info.supply_voltage_min_v);
        uvis25_interface_debug_print("uvis25: max supply voltage is %0.1fV.\n", info.supply_voltage_max_v);
        uvis25_interface_debug_print("uvis25: max current is %0.2fmA.\n", info.max_current_ma);
        uvis25_interface_debug_print("uvis25: max temperature is %0.1fC.\n", info.temperature_max);
        uvis25_interface_debug_print("uvis25: min temperature is %0.1fC.\n", info.temperature_min);
    }
    
    /* set interface */
    res = uvis25_set_interface(&gs_handle, interface);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set interface failed.\n");
       
        return 1;
    }
    
    /* uvis25 init */
    res = uvis25_init(&gs_handle);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: init failed.\n");
       
        return 1;
    }
    
    /* start read test */
    uvis25_interface_debug_print("uvis25: start read test.\n");
    
    /* enable iic */
    res = uvis25_set_iic(&gs_handle, UVIS25_BOOL_TRUE);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set iic failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set spi 4 wire */
    res = uvis25_set_spi_wire(&gs_handle, UVIS25_SPI_WIRE_4);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set spi wire failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set normal mode */
    res = uvis25_set_boot(&gs_handle, UVIS25_BOOT_NORMAL_MODE);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set boot failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* disable block data update */
    res = uvis25_set_block_data_update(&gs_handle, UVIS25_BOOL_FALSE);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set block data update failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set interrupt active level lower */
    res = uvis25_set_interrupt_active_level(&gs_handle, UVIS25_INTERRUPT_ACTIVE_LEVEL_LOWER);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set interrupt active level failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set interrupt pin type push-pull */
    res = uvis25_set_interrupt_pin_type(&gs_handle, UVIS25_INTERRUPT_PIN_TYPE_PUSH_PULL);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set interrupt pin type failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set interrupt uv index high low */
    res = uvis25_set_interrupt_type(&gs_handle, UVIS25_INTERRUPT_TYPE_UV_INDEX_HIGH_LOW);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set interrupt type failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* disable interrupt */
    res = uvis25_set_interrupt(&gs_handle, UVIS25_BOOL_FALSE);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set interrupt failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* enable latch interrupt */
    res = uvis25_set_latch_interrupt(&gs_handle, UVIS25_BOOL_TRUE);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set latch interrupt failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* disable interrupt low threshold */
    res = uvis25_set_interrupt_low_threshold(&gs_handle, UVIS25_BOOL_FALSE);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set interrupt low threshold failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* disable interrupt high threshold */
    res = uvis25_set_interrupt_high_threshold(&gs_handle, UVIS25_BOOL_FALSE);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set interrupt high threshold failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* convert to register */
    res = uvis25_threshold_convert_to_register(&gs_handle,  3.0f, (uint8_t *)&reg);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: threshold convert to register failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set threshold */
    res = uvis25_set_threshold(&gs_handle, reg);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: set threshold failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    
    /* set continuous read */
    uvis25_interface_debug_print("uvis25: set continuous read.\n");
    
    /* start continuous read */
    res = uvis25_start_continuous_read(&gs_handle);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: start continuous read failed.\n");
        (void)uvis25_deinit(&gs_handle);
        
        return 1;
    }
    for (i = 0; i < times; i++)
    {
        uint8_t raw;
        float uv;
        
        uvis25_interface_delay_ms(2000);
    
        /* continuous read */
        res = uvis25_continuous_read(&gs_handle, (uint8_t *)&raw, (float *)&uv);
        if (res != 0)
        {
            uvis25_interface_debug_print("uvis25: read failed.\n");
            (void)uvis25_deinit(&gs_handle);
            
            return 1;
        }
        uvis25_interface_debug_print("uvis25: uv is %0.4f.\n", uv);                                        
    }
 
    /* stop continuous read */
    res = uvis25_stop_continuous_read(&gs_handle);
    if (res != 0)
    {
        uvis25_interface_debug_print("uvis25: stop continuous read failed.\n");
        
        return 1;
    }
 
    /* set one shot read */
    uvis25_interface_debug_print("uvis25: set one shot read.\n");  
    for (i = 0; i < times; i++)
    {
        uint8_t raw;
        float uv;
        
        uvis25_interface_delay_ms(2000);
 
        /* single read */
        res = uvis25_single_read(&gs_handle, (uint8_t *)&raw, (float *)&uv);
        if (res != 0)
        {
            uvis25_interface_debug_print("uvis25: read failed.\n");
            (void)uvis25_deinit(&gs_handle);
            
            return 1;
        }
        uvis25_interface_debug_print("uvis25: uv is %0.4f.\n", uv);
    }
 
    /* finish read test */
    uvis25_interface_debug_print("uvis25: finish read test.\n");
    (void)uvis25_deinit(&gs_handle);
    
    return 0;
}